Installation Guide

INSTALLATION PROCESS

RO Reject Water Storage Tank 15L Without Auto Cut

The process of installing the storage tanks of capacity 15 Litres without Autocut is as follows:

1.

Fix the Clamps

Clamps and screws are free accessories with the product.

2.

Attach the tap

Attach the tap to the hole of the tank and tighten it.

3.

Wall mount the tank

Wall mount the tank with the help of a wall plug (gitti).

4.

Fix reject water pipe

Fix the reject water pipe that comes out from the RO to the tank.

5.

Connect with Aqua Save

Connect the pipe with Aqua Save and start saving water!

INSTALLATION PROCESS

RO Reject Water Storage Tank 30L Without Auto Cut

The process of installing the storage tanks of capacity 15 Litres without Autocut is as follows:

1.

Wall mount the stand

Wall mount the stand with a wall plug (gitti) & screw.

2.

Attach the tap

Attach the tap to the hole of the tank and tighten it.

3.

Place the tank

Place the 30 Litres capacity tank on the stand.

4.

Fix reject water pipe

Fix the reject water pipe that comes out from the RO to the tank.

5.

Connect with Aqua Save

Connect the pipe with Aqua Save and start saving water!

INSTALLATION PROCESS

RO Reject Water Storage Tank 15L Without Auto Cut

The process of installing the storage tanks of capacity 15 Litres without Autocut is as follows:

1.

Fix the Clamps

Clamps and screws are free accessories with the product.

2.

Attach the tap

Attach the tap to the hole of the tank and tighten it.

3.

Wall mount the tank

Wall mount the tank with the help of a wall plug (gitti).

4.

Fix reject water pipe

Fix the reject water pipe that comes out from the RO to the tank.

5.

Connect with Aqua Save

Connect the pipe with Aqua Save and start saving water!

6.

Connect with Aqua Save

Connect the pipe with Aqua Save and start saving water!

INSTALLATION PROCESS

RO Reject Water Storage Tank 15L Without Auto Cut

The process of installing the storage tanks of capacity 15 Litres without Autocut is as follows:

1.

Fix the Clamps

Clamps and screws are free accessories with the product.

2.

Attach the tap

Attach the tap to the hole of the tank and tighten it.

3.

Wall mount the tank

Wall mount the tank with the help of a wall plug (gitti).

4.

Fix reject water pipe

Fix the reject water pipe that comes out from the RO to the tank.

5.

Connect with Aqua Save

Connect the pipe with Aqua Save and start saving water!

INSTALLATION PROCESS

RO Reject Water Storage Tank 30L Without Auto Cut

The process of installing the storage tanks of capacity 15 Litres without Autocut is as follows:

1.

Fix the Clamps

Clamps and screws are free accessories with the product.

2.

Attach the tap

Attach the tap to the hole of the tank and tighten it.

3.

Wall mount the tank

Wall mount the tank with the help of a wall plug (gitti).

4.

Fix reject water pipe

Fix the reject water pipe that comes out from the RO to the tank.

5.

Connect with Aqua Save

Connect the pipe with Aqua Save and start saving water!